New hydrotransmatic drive provides the high speed, low torque effort when you are traveling across a jobsite, then changes to high torque, low speed when you demand greater traction and more power.
Terex® TSP (Terex Special Parallel) modified parallel linkage provides the breakout force of traditional Z-bar linkage and the superior load leveling and visibility of parallel lift systems.
Transverse mounted Cummins QSB 6.7 turbocharged diesel engine provides added power as well as additional counterweight to the rear of the machine for improved operator performance.
Oscillating rear axle provides stable operation on uneven ground while maintaining 4-wheel traction for greater operator comfort and control.
Single pin articulated joint provides a more stable platform and less need for adjusting and maintenance.
Dynamic braking is achieved through the hydrostatic drive for increased brake life.
GENERAL INFORMATION
Manufacturer
Terex
Model Year
2010
Model
TL210
MSRP
Request a Quote
DIMENSIONS
Length
23 ft. 3 in. (7,095 mm) bucket on ground
Height
10 ft. 8 in. (3,260 mm) top of cab
Width
8 ft. 2 in. (2,500 mm)
Weight
27,558 lbs. (12,500 kg) operating
Wheelbase
10 ft. 2 in. (3,100 mm)
Turning Radius
19 ft. 7 in. (5,970 mm) at outside bucket edge
DRIVETRAIN
Transmission Type
Hydrostatic drive, closed circuit, independent from loader hydraulics
Transmission Speed
Range I: 0 - 3.7 mph (0 - 6 km/h) Range II: 0 - 25 mph (0 - 40 km/h)
Number of Speeds
2
Axles
Front: Rigid planetary final drive axle; limited slip-type differential
Rear: Oscillating (with cushioning) planetary final drive axle, with integrated reduction gear; limited slip-type differential
Tires
20.5-25 EM 60 12 PR
ENGINE
Engine Type
Turbocharged, COM III / EPA III, 4-stroke, common rail injection
Engine Make
Cummins
Engine Model
QSB 6.7
Fuel Type
Diesel
Cylinders
6
Net Horsepower
162 hp (119 kW)
Displacement
409 ci (6,700 cc)
Cooling
Water
Fuel Tank Capacity
63 gal. (240 l)
Rated Speed
2,200 rpm
BATTERY
Voltage
24V
Amps
760A
HYDRAULICS
Hydraulic Tank Capacity
35.6 gal. (135 l)
Hydraulic Reserve
Proportional hydraulic valve with 3 control circuits
Std Pump Flow
42.3 gpm (160 lpm)
OPERATIONAL
Rated Operating Load
8,699 lbs. (3,945 kg) fully articulated
Tipping Load
Straight at Full Reach: 19,613 lbs. (8,895 kg) Articulated at Full Reach: 17,397 lbs. (7,890 kg)
Bucket Capacity
2.75 cu. yd. (2.1 m³)
Bucket Breakout Force
23,830 lbs. (106,000 N) at bucket edge
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Specs, Quotes, Overview
